https://furnace-blower-motor.com Fri, 17 Apr 2026 04:00:45 +0000 en-CA hourly 1 https://wordpress.org/?v=4.1.1 https://furnace-blower-motor.com/2024/08/28/marathon-swl48a11t182f-furnace-blower-motor-13hp-1075-rpm-208-230-v-used-mc705/ https://furnace-blower-motor.com/2024/08/28/marathon-swl48a11t182f-furnace-blower-motor-13hp-1075-rpm-208-230-v-used-mc705/#comments Wed, 28 Aug 2024 07:21:08 +0000 https://furnace-blower-motor.com/2024/08/28/marathon-swl48a11t182f-furnace-blower-motor-13hp-1075-rpm-208-230-v-used-mc705/





This is Marathon SWL48A11T182F Lennox 90A0801 Furnace Blower Motor 1/3HP 1075 RPM 208-230 V used part. This part was removed by HVAC installer from a working unit. Old system was replaced with newer one (more energy efficient) and was in good working condition. Motor has been tested, works well and it is in good cosmetic condition. Please see more details from the images attached. Please learn images carefully because you will receive exactly the same as pictured. Purchasing used parts you agree with the statement that sometimes hidden defects or malfunctions may occur during installation or continuous use. Most of the parts require specific knowledge and skills to be installed properly. T have skills or knowledge, you must ask certified HVAC technician to install.

]]> https://furnace-blower-motor.com/2024/08/28/marathon-swl48a11t182f-furnace-blower-motor-13hp-1075-rpm-208-230-v-used-mc705/feed/ 0 https://furnace-blower-motor.com/2022/12/01/marathon-motors-048a11o1875-motor-34-hp-1075-rpm-48z-460v-4/ https://furnace-blower-motor.com/2022/12/01/marathon-motors-048a11o1875-motor-34-hp-1075-rpm-48z-460v-4/#comments Fri, 02 Dec 2022 04:41:10 +0000 https://furnace-blower-motor.com/2022/12/01/marathon-motors-048a11o1875-motor-34-hp-1075-rpm-48z-460v-4/



Motor, 3/4 HP, 1075 rpm, 48Z, 460V. Direct Drive Blower Motor, Single Phase, Motor Design Permanent Split Capacitor, 3/4 HP, Nameplate RPM 1,075, No. Class B, Motor Shaft Rotation CW/CCW, Max. 40 Degrees C, Duty Cycle Continuous, Lead Length 27 in, Motor Enclosure Design Open Air-Over, Motor Mounting Type Stud, Motor Mounting Position Horizontal. This condenser fan motor features an open air-over enclosure design. Use to operate condenser fans on refrigeration or air conditioning equipment. Grainger Part #:490T88. Add to Favorite Sellers. Sign up to Newsletter. View more great items! These items are intended to be used in North America. Power adapters and other modifications may be necessary for proper operation in other countries. GRAINGER STANDARD TERMS AND CONDITIONS. Please read these terms and conditions carefully. They contain important information concerning customer? Legal rights, warranties, obligations and available dispute resolutions remedies. They also provide that if Grainger is unable to resolve any matter to Customer? S satisfaction, Customer will exclusively use arbitration to decide the dispute and Customer will bring its claim solely on an individual basis and not in a class action or representative proceeding. Grainger reserves the right to revise these Terms and Conditions at any time. Product Compliance and Suitability. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose. Certain products may not be available for sale in all areas. Grainger does not guarantee compliance or suitability of the products it sells with any laws, codes or regulations, nor does Grainger accept responsibility for construction, installation and/or use of a product. It is Customer’s responsibility to review the product application and all applicable laws, codes and regulations for each relevant jurisdiction to be sure that the construction, installation, and/or use involving the products are compliant. S acceptance of any order is subject to Customer? S assent to all of the terms and conditions set forth herein. Customer’s assent to these terms and conditions shall be presumed from Customer’s receipt of Grainger? S acknowledgment, or from Customer? S acceptance of all or any part of the products ordered. No additions or modifications of Grainger? S terms and conditions by Customer shall be binding upon Grainger, unless agreed to in writing by an authorized representative of Grainger. Grainger reserves the right to accept or reject any order. The terms and conditions in: (i) Grainger? S forms; (ii) acknowledgments; (iii) quotations; (iv) invoices; (v) web sites; (vi) catalogs; and (vii) extension of credit are incorporated herein by reference, and constitute the entire and exclusive agreement between Customer and Grainger. Business Customers hereby agree to indemnify and hold Grainger harmless against any breach of this representation. ADDITIONAL TERMS AND CONDITIONS RELATED TO EXPORT OF GRAINGER PRODUCTS. IN ADDITION TO THE STANDARD TERMS AND CONDITIONS IN SECTION I, EXPORT SALES OF GRAINGER PRODUCTS WILL BE GOVERNED BY THE FOLLOWING ADDITIONAL TERMS AND CONDITIONS RELATED TO EXPORT OF GRAINGER PRODUCTS? IN THE EVENT OF A CONFLICT BETWEEN GRAINGER? S STANDARD TERMS AND CONDITIONS IN SECTION I AND THE ADDITIONAL EXPORT TERMS IN SECTION III, THE ADDITIONAL TERMS IN SECTION III SHALL PREVAIL FOR EXPORT SALES OF GRAINGER PRODUCTS. Customer acknowledges that no order shall be deemed accepted unless and until it is verified and accepted by Grainger, or any of its U. Affiliates and divisions, at a continental U. Facility or at any of its websites. Customer further consents that submission of its order shall subject Customer to the jurisdiction of the federal courts of the U. And of the State where acceptance occurred in the U. Grainger is required to charge U. Export Controls and Related Regulations. Customer represents and warrants that it is not designated on, or associated with, any party designated on any of the U. Government restricted parties lists, including without limitation, the U. Commerce Department Bureau of Industry and Security? Denied Persons List; Entity List or Unverified List; the U. Treasury Department Office of Foreign Assets Control? Specially Designated Nationals and Blocked Persons List; or the U. State Department Directorate of Defense Trade Controls? Customer shall comply with all applicable U. Economic sanctions and export control laws and regulations, including without limitation, the regulations administered by OFAC, the Export Administration Regulations? Administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. It is specifically agreed that Customer shall be the foreign principal party in interest? In the event a license is required for export from the U. Agent of the FPPI the exporter of record for purposes of meeting EAR requirements. Country of Importation and Anti-diversion. Customer represents that it is purchasing products from the U. And importing them to the country for the use of the ultimate consignee specified in the Customer and Grainger documentation. Customer agrees that the products will not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U. Government or as otherwise authorized by U. Any commodities, technology and software will be exported from the U. In accordance with the U. Export Administration Regulations and other applicable laws or regulations. Diversion contrary to U. Customer further agrees to inform Grainger at the time of order of any North American Free Trade Agreement or other special documentation, packaging or product marking or labeling, but Grainger shall not be responsible for providing any such documentation, packaging, marking or labeling other than such documents that are necessary under U. Export laws and regulations for export, unless Grainger expressly agrees to do so. Permits, Export, and Import Licenses. Customer shall be responsible for obtaining any licenses or other official authorizations that may be required by the country of importation. When the Customer is designated as the U. Principal Party of Interest, the Customer shall be responsible for obtaining licenses under the EAR, International Traffic in Arms Regulations, Toxic Substances Control Act, or other applicable laws or regulations. If the Customer is the FPPI, then the terms contained in subsection 6 of this Section III shall apply. The rights and obligations of the parties under these terms and conditions shall not be governed by the provisions of the 1980 United Nations Convention of Contracts for the International Sale of Goods or the United Nations Convention on the Limitation Period in the International Sale of Goods. Rather, these terms and conditions shall be governed by the laws of the State of Illinois, U. Including its provisions of the Uniform Commercial Code, but excluding its conflict of law rules. This item is in the category “Business & Industrial\HVAC & Refrigeration\HVAC & Refrigeration: Parts & Accessories\HVAC & Refrigeration: Fans & Blowers”. The seller is “grainger” and is located in this country: US. This item can be shipped worldwide.

• Brand: MARATHON MOTORS
• Type: Direct Drive Blower Motors
• Voltage: 460
• MPN: 048A11O1875
• Model: 048A11O1875
• UPC: 722856038814

]]> https://furnace-blower-motor.com/2022/12/01/marathon-motors-048a11o1875-motor-34-hp-1075-rpm-48z-460v-4/feed/ 0 https://furnace-blower-motor.com/2022/11/08/marathon-motors-048a11o1875-motor-34-hp-1075-rpm-48z-460v-3/ https://furnace-blower-motor.com/2022/11/08/marathon-motors-048a11o1875-motor-34-hp-1075-rpm-48z-460v-3/#comments Wed, 09 Nov 2022 00:12:12 +0000 https://furnace-blower-motor.com/2022/11/08/marathon-motors-048a11o1875-motor-34-hp-1075-rpm-48z-460v-3/



Motor, 3/4 HP, 1075 rpm, 48Z, 460V. Direct Drive Blower Motor, Single Phase, Motor Design Permanent Split Capacitor, 3/4 HP, Nameplate RPM 1,075, No. Class B, Motor Shaft Rotation CW/CCW, Max. 40 Degrees C, Duty Cycle Continuous, Lead Length 27 in, Motor Enclosure Design Open Air-Over, Motor Mounting Type Stud, Motor Mounting Position Horizontal. This condenser fan motor features an open air-over enclosure design. Use to operate condenser fans on refrigeration or air conditioning equipment. Grainger Part #:490T88. Add to Favorite Sellers. Sign up to Newsletter. View more great items! These items are intended to be used in North America. Power adapters and other modifications may be necessary for proper operation in other countries. GRAINGER STANDARD TERMS AND CONDITIONS. Please read these terms and conditions carefully. They contain important information concerning customer? Legal rights, warranties, obligations and available dispute resolutions remedies. They also provide that if Grainger is unable to resolve any matter to Customer? S satisfaction, Customer will exclusively use arbitration to decide the dispute and Customer will bring its claim solely on an individual basis and not in a class action or representative proceeding. Grainger reserves the right to revise these Terms and Conditions at any time. Product Compliance and Suitability. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose. Certain products may not be available for sale in all areas. Grainger does not guarantee compliance or suitability of the products it sells with any laws, codes or regulations, nor does Grainger accept responsibility for construction, installation and/or use of a product. It is Customer’s responsibility to review the product application and all applicable laws, codes and regulations for each relevant jurisdiction to be sure that the construction, installation, and/or use involving the products are compliant. S acceptance of any order is subject to Customer? S assent to all of the terms and conditions set forth herein. Customer’s assent to these terms and conditions shall be presumed from Customer’s receipt of Grainger? S acknowledgment, or from Customer? S acceptance of all or any part of the products ordered. No additions or modifications of Grainger? S terms and conditions by Customer shall be binding upon Grainger, unless agreed to in writing by an authorized representative of Grainger. Grainger reserves the right to accept or reject any order. The terms and conditions in: (i) Grainger? S forms; (ii) acknowledgments; (iii) quotations; (iv) invoices; (v) web sites; (vi) catalogs; and (vii) extension of credit are incorporated herein by reference, and constitute the entire and exclusive agreement between Customer and Grainger. Business Customers hereby agree to indemnify and hold Grainger harmless against any breach of this representation. ADDITIONAL TERMS AND CONDITIONS RELATED TO EXPORT OF GRAINGER PRODUCTS. IN ADDITION TO THE STANDARD TERMS AND CONDITIONS IN SECTION I, EXPORT SALES OF GRAINGER PRODUCTS WILL BE GOVERNED BY THE FOLLOWING ADDITIONAL TERMS AND CONDITIONS RELATED TO EXPORT OF GRAINGER PRODUCTS? IN THE EVENT OF A CONFLICT BETWEEN GRAINGER? S STANDARD TERMS AND CONDITIONS IN SECTION I AND THE ADDITIONAL EXPORT TERMS IN SECTION III, THE ADDITIONAL TERMS IN SECTION III SHALL PREVAIL FOR EXPORT SALES OF GRAINGER PRODUCTS. Customer acknowledges that no order shall be deemed accepted unless and until it is verified and accepted by Grainger, or any of its U. Affiliates and divisions, at a continental U. Facility or at any of its websites. Customer further consents that submission of its order shall subject Customer to the jurisdiction of the federal courts of the U. And of the State where acceptance occurred in the U. Grainger is required to charge U. Export Controls and Related Regulations. Customer represents and warrants that it is not designated on, or associated with, any party designated on any of the U. Government restricted parties lists, including without limitation, the U. Commerce Department Bureau of Industry and Security? Denied Persons List; Entity List or Unverified List; the U. Treasury Department Office of Foreign Assets Control? Specially Designated Nationals and Blocked Persons List; or the U. State Department Directorate of Defense Trade Controls? Customer shall comply with all applicable U. Economic sanctions and export control laws and regulations, including without limitation, the regulations administered by OFAC, the Export Administration Regulations? Administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. It is specifically agreed that Customer shall be the foreign principal party in interest? In the event a license is required for export from the U. Agent of the FPPI the exporter of record for purposes of meeting EAR requirements. Country of Importation and Anti-diversion. Customer represents that it is purchasing products from the U. And importing them to the country for the use of the ultimate consignee specified in the Customer and Grainger documentation. Customer agrees that the products will not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U. Government or as otherwise authorized by U. Any commodities, technology and software will be exported from the U. In accordance with the U. Export Administration Regulations and other applicable laws or regulations. Diversion contrary to U. Customer further agrees to inform Grainger at the time of order of any North American Free Trade Agreement or other special documentation, packaging or product marking or labeling, but Grainger shall not be responsible for providing any such documentation, packaging, marking or labeling other than such documents that are necessary under U. Export laws and regulations for export, unless Grainger expressly agrees to do so. Permits, Export, and Import Licenses. Customer shall be responsible for obtaining any licenses or other official authorizations that may be required by the country of importation. When the Customer is designated as the U. Principal Party of Interest, the Customer shall be responsible for obtaining licenses under the EAR, International Traffic in Arms Regulations, Toxic Substances Control Act, or other applicable laws or regulations. If the Customer is the FPPI, then the terms contained in subsection 6 of this Section III shall apply. The rights and obligations of the parties under these terms and conditions shall not be governed by the provisions of the 1980 United Nations Convention of Contracts for the International Sale of Goods or the United Nations Convention on the Limitation Period in the International Sale of Goods. Rather, these terms and conditions shall be governed by the laws of the State of Illinois, U. Including its provisions of the Uniform Commercial Code, but excluding its conflict of law rules. This item is in the category “Business & Industrial\HVAC & Refrigeration\HVAC & Refrigeration: Parts & Accessories\HVAC & Refrigeration: Fans & Blowers”. The seller is “grainger” and is located in this country: US. This item can be shipped worldwide.

• Brand: MARATHON MOTORS
• Type: Direct Drive Blower Motors
• Voltage: 460
• Model: 048A11O1875
• MPN: 048A11O1875
• UPC: 722856038814

]]> https://furnace-blower-motor.com/2022/11/08/marathon-motors-048a11o1875-motor-34-hp-1075-rpm-48z-460v-3/feed/ 0 https://furnace-blower-motor.com/2022/03/28/marathon-motors-048a11o1875-motor-34-hp-1075-rpm-48z-460v-2/ https://furnace-blower-motor.com/2022/03/28/marathon-motors-048a11o1875-motor-34-hp-1075-rpm-48z-460v-2/#comments Tue, 29 Mar 2022 01:09:25 +0000 https://furnace-blower-motor.com/2022/03/28/marathon-motors-048a11o1875-motor-34-hp-1075-rpm-48z-460v-2/



Motor, 3/4 HP, 1075 rpm, 48Z, 460V. Direct Drive Blower Motor, Single Phase, Motor Design Permanent Split Capacitor, 3/4 HP, Nameplate RPM 1,075, No. Class B, Motor Shaft Rotation CW/CCW, Max. 40 Degrees C, Duty Cycle Continuous, Lead Length 27 in, Motor Enclosure Design Open Air-Over, Motor Mounting Type Stud, Motor Mounting Position Horizontal. This condenser fan motor features an open air-over enclosure design. Use to operate condenser fans on refrigeration or air conditioning equipment. Grainger Part #:490T88. Add to Favorite Sellers. Sign up to Newsletter. View more great items. 3M 26022 Spray Gun Cup Lid, S12 Type, Plastic. MORSE MHSG23 Hole Saw, Saw Dia. BUSSMANN LPJ-450SP Fuse, Class J, 450A, LPJ Series. AMERICAN GARAGE DOOR SUPPLY T212VR Vertical Track 11ft 4in, For 12ft Door, PR. These items are intended to be used in North America. Power adapters and other modifications may be necessary for proper operation in other countries. GRAINGER STANDARD TERMS AND CONDITIONS. Please read these terms and conditions carefully. They contain important information concerning customer? Legal rights, warranties, obligations and available dispute resolutions remedies. They also provide that if Grainger is unable to resolve any matter to Customer? S satisfaction, Customer will exclusively use arbitration to decide the dispute and Customer will bring its claim solely on an individual basis and not in a class action or representative proceeding. Grainger reserves the right to revise these Terms and Conditions at any time. Product Compliance and Suitability. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose. Certain products may not be available for sale in all areas. Grainger does not guarantee compliance or suitability of the products it sells with any laws, codes or regulations, nor does Grainger accept responsibility for construction, installation and/or use of a product. It is Customer’s responsibility to review the product application and all applicable laws, codes and regulations for each relevant jurisdiction to be sure that the construction, installation, and/or use involving the products are compliant. S acceptance of any order is subject to Customer? S assent to all of the terms and conditions set forth herein. Customer’s assent to these terms and conditions shall be presumed from Customer’s receipt of Grainger? S acknowledgment, or from Customer? S acceptance of all or any part of the products ordered. No additions or modifications of Grainger? S terms and conditions by Customer shall be binding upon Grainger, unless agreed to in writing by an authorized representative of Grainger. Grainger reserves the right to accept or reject any order. The terms and conditions in: (i) Grainger? S forms; (ii) acknowledgments; (iii) quotations; (iv) invoices; (v) web sites; (vi) catalogs; and (vii) extension of credit are incorporated herein by reference, and constitute the entire and exclusive agreement between Customer and Grainger. Business Customers hereby agree to indemnify and hold Grainger harmless against any breach of this representation. ADDITIONAL TERMS AND CONDITIONS RELATED TO EXPORT OF GRAINGER PRODUCTS. IN ADDITION TO THE STANDARD TERMS AND CONDITIONS IN SECTION I, EXPORT SALES OF GRAINGER PRODUCTS WILL BE GOVERNED BY THE FOLLOWING ADDITIONAL TERMS AND CONDITIONS RELATED TO EXPORT OF GRAINGER PRODUCTS? IN THE EVENT OF A CONFLICT BETWEEN GRAINGER? S STANDARD TERMS AND CONDITIONS IN SECTION I AND THE ADDITIONAL EXPORT TERMS IN SECTION III, THE ADDITIONAL TERMS IN SECTION III SHALL PREVAIL FOR EXPORT SALES OF GRAINGER PRODUCTS. Customer acknowledges that no order shall be deemed accepted unless and until it is verified and accepted by Grainger, or any of its U. Affiliates and divisions, at a continental U. Facility or at any of its websites. Customer further consents that submission of its order shall subject Customer to the jurisdiction of the federal courts of the U. And of the State where acceptance occurred in the U. Grainger is required to charge U. Export Controls and Related Regulations. Customer represents and warrants that it is not designated on, or associated with, any party designated on any of the U. Government restricted parties lists, including without limitation, the U. Commerce Department Bureau of Industry and Security? Denied Persons List; Entity List or Unverified List; the U. Treasury Department Office of Foreign Assets Control? Specially Designated Nationals and Blocked Persons List; or the U. State Department Directorate of Defense Trade Controls? Customer shall comply with all applicable U. Economic sanctions and export control laws and regulations, including without limitation, the regulations administered by OFAC, the Export Administration Regulations? Administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. It is specifically agreed that Customer shall be the foreign principal party in interest? In the event a license is required for export from the U. Agent of the FPPI the exporter of record for purposes of meeting EAR requirements. Country of Importation and Anti-diversion. Customer represents that it is purchasing products from the U. And importing them to the country for the use of the ultimate consignee specified in the Customer and Grainger documentation. Customer agrees that the products will not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U. Government or as otherwise authorized by U. Any commodities, technology and software will be exported from the U. In accordance with the U. Export Administration Regulations and other applicable laws or regulations. Diversion contrary to U. Customer further agrees to inform Grainger at the time of order of any North American Free Trade Agreement or other special documentation, packaging or product marking or labeling, but Grainger shall not be responsible for providing any such documentation, packaging, marking or labeling other than such documents that are necessary under U. Export laws and regulations for export, unless Grainger expressly agrees to do so. Permits, Export, and Import Licenses. Customer shall be responsible for obtaining any licenses or other official authorizations that may be required by the country of importation. When the Customer is designated as the U. Principal Party of Interest, the Customer shall be responsible for obtaining licenses under the EAR, International Traffic in Arms Regulations, Toxic Substances Control Act, or other applicable laws or regulations. If the Customer is the FPPI, then the terms contained in subsection 6 of this Section III shall apply. The rights and obligations of the parties under these terms and conditions shall not be governed by the provisions of the 1980 United Nations Convention of Contracts for the International Sale of Goods or the United Nations Convention on the Limitation Period in the International Sale of Goods. Rather, these terms and conditions shall be governed by the laws of the State of Illinois, U. Including its provisions of the Uniform Commercial Code, but excluding its conflict of law rules. This item is in the category “Business & Industrial\HVAC & Refrigeration\HVAC & Refrigeration: Parts & Accessories\HVAC & Refrigeration: Fans & Blowers”. The seller is “grainger” and is located in this country: US. This item can be shipped worldwide.

• Brand: MARATHON MOTORS
• Type: Direct Drive Blower Motors
• Voltage: 460
• MPN: 048A11O1875
• Model: 048A11O1875
• UPC: 722856038814

]]> https://furnace-blower-motor.com/2022/03/28/marathon-motors-048a11o1875-motor-34-hp-1075-rpm-48z-460v-2/feed/ 0 https://furnace-blower-motor.com/2022/02/25/marathon-motors-048a11o1875-motor-34-hp-1075-rpm-48z-460v/ https://furnace-blower-motor.com/2022/02/25/marathon-motors-048a11o1875-motor-34-hp-1075-rpm-48z-460v/#comments Fri, 25 Feb 2022 06:22:21 +0000 https://furnace-blower-motor.com/2022/02/25/marathon-motors-048a11o1875-motor-34-hp-1075-rpm-48z-460v/



Motor, 3/4 HP, 1075 rpm, 48Z, 460V. Direct Drive Blower Motor, Single Phase, Motor Design Permanent Split Capacitor, 3/4 HP, Nameplate RPM 1,075, No. Class B, Motor Shaft Rotation CW/CCW, Max. 40 Degrees C, Duty Cycle Continuous, Lead Length 27 in, Motor Enclosure Design Open Air-Over, Motor Mounting Type Stud, Motor Mounting Position Horizontal. This condenser fan motor features an open air-over enclosure design. Use to operate condenser fans on refrigeration or air conditioning equipment. Grainger Part #:490T88. Add to Favorite Sellers. Sign up to Newsletter. View more great items. BESSEY KRE3524 Parallel Clamp, 3-3/4 Throat Depth. GRAINGER APPROVED M51240.080.0020 STSC FL SSA2, M8x1.25mmx20mm, PK10. SPECO TECHNOLOGIES VGABNC Video Converter, VGA to BNC. GRAINGER APPROVED U04114.025.0250 HxHdCpScrw, Steel, ZcYlw, 2.5in, Hex, 50. These items are intended to be used in North America. Power adapters and other modifications may be necessary for proper operation in other countries. GRAINGER STANDARD TERMS AND CONDITIONS. Please read these terms and conditions carefully. They contain important information concerning customer? Legal rights, warranties, obligations and available dispute resolutions remedies. They also provide that if Grainger is unable to resolve any matter to Customer? S satisfaction, Customer will exclusively use arbitration to decide the dispute and Customer will bring its claim solely on an individual basis and not in a class action or representative proceeding. Grainger reserves the right to revise these Terms and Conditions at any time. Product Compliance and Suitability. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose. Certain products may not be available for sale in all areas. Grainger does not guarantee compliance or suitability of the products it sells with any laws, codes or regulations, nor does Grainger accept responsibility for construction, installation and/or use of a product. It is Customer’s responsibility to review the product application and all applicable laws, codes and regulations for each relevant jurisdiction to be sure that the construction, installation, and/or use involving the products are compliant. S acceptance of any order is subject to Customer? S assent to all of the terms and conditions set forth herein. Customer’s assent to these terms and conditions shall be presumed from Customer’s receipt of Grainger? S acknowledgment, or from Customer? S acceptance of all or any part of the products ordered. No additions or modifications of Grainger? S terms and conditions by Customer shall be binding upon Grainger, unless agreed to in writing by an authorized representative of Grainger. Grainger reserves the right to accept or reject any order. The terms and conditions in: (i) Grainger? S forms; (ii) acknowledgments; (iii) quotations; (iv) invoices; (v) web sites; (vi) catalogs; and (vii) extension of credit are incorporated herein by reference, and constitute the entire and exclusive agreement between Customer and Grainger. Business Customers hereby agree to indemnify and hold Grainger harmless against any breach of this representation. ADDITIONAL TERMS AND CONDITIONS RELATED TO EXPORT OF GRAINGER PRODUCTS. IN ADDITION TO THE STANDARD TERMS AND CONDITIONS IN SECTION I, EXPORT SALES OF GRAINGER PRODUCTS WILL BE GOVERNED BY THE FOLLOWING ADDITIONAL TERMS AND CONDITIONS RELATED TO EXPORT OF GRAINGER PRODUCTS? IN THE EVENT OF A CONFLICT BETWEEN GRAINGER? S STANDARD TERMS AND CONDITIONS IN SECTION I AND THE ADDITIONAL EXPORT TERMS IN SECTION III, THE ADDITIONAL TERMS IN SECTION III SHALL PREVAIL FOR EXPORT SALES OF GRAINGER PRODUCTS. Customer acknowledges that no order shall be deemed accepted unless and until it is verified and accepted by Grainger, or any of its U. Affiliates and divisions, at a continental U. Facility or at any of its websites. Customer further consents that submission of its order shall subject Customer to the jurisdiction of the federal courts of the U. And of the State where acceptance occurred in the U. Grainger is required to charge U. Export Controls and Related Regulations. Customer represents and warrants that it is not designated on, or associated with, any party designated on any of the U. Government restricted parties lists, including without limitation, the U. Commerce Department Bureau of Industry and Security? Denied Persons List; Entity List or Unverified List; the U. Treasury Department Office of Foreign Assets Control? Specially Designated Nationals and Blocked Persons List; or the U. State Department Directorate of Defense Trade Controls? Customer shall comply with all applicable U. Economic sanctions and export control laws and regulations, including without limitation, the regulations administered by OFAC, the Export Administration Regulations? Administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. It is specifically agreed that Customer shall be the foreign principal party in interest? In the event a license is required for export from the U. Agent of the FPPI the exporter of record for purposes of meeting EAR requirements. Country of Importation and Anti-diversion. Customer represents that it is purchasing products from the U. And importing them to the country for the use of the ultimate consignee specified in the Customer and Grainger documentation. Customer agrees that the products will not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U. Government or as otherwise authorized by U. Any commodities, technology and software will be exported from the U. In accordance with the U. Export Administration Regulations and other applicable laws or regulations. Diversion contrary to U. Customer further agrees to inform Grainger at the time of order of any North American Free Trade Agreement or other special documentation, packaging or product marking or labeling, but Grainger shall not be responsible for providing any such documentation, packaging, marking or labeling other than such documents that are necessary under U. Export laws and regulations for export, unless Grainger expressly agrees to do so. Permits, Export, and Import Licenses. Customer shall be responsible for obtaining any licenses or other official authorizations that may be required by the country of importation. When the Customer is designated as the U. Principal Party of Interest, the Customer shall be responsible for obtaining licenses under the EAR, International Traffic in Arms Regulations, Toxic Substances Control Act, or other applicable laws or regulations. If the Customer is the FPPI, then the terms contained in subsection 6 of this Section III shall apply. The rights and obligations of the parties under these terms and conditions shall not be governed by the provisions of the 1980 United Nations Convention of Contracts for the International Sale of Goods or the United Nations Convention on the Limitation Period in the International Sale of Goods. Rather, these terms and conditions shall be governed by the laws of the State of Illinois, U. Including its provisions of the Uniform Commercial Code, but excluding its conflict of law rules. This item is in the category “Business & Industrial\HVAC & Refrigeration\HVAC & Refrigeration: Parts & Accessories\HVAC & Refrigeration: Fans & Blowers”. The seller is “grainger” and is located in this country: US. This item can be shipped worldwide.

• Brand: MARATHON MOTORS
• Type: Direct Drive Blower Motors
• Voltage: 460
• MPN: 048A11O1875
• Model: 048A11O1875
• UPC: 722856038814

]]> https://furnace-blower-motor.com/2022/02/25/marathon-motors-048a11o1875-motor-34-hp-1075-rpm-48z-460v/feed/ 0 https://furnace-blower-motor.com/2021/04/16/marathon-3-hp-blower-motor-200v-nos-6va1827tdr5827-shaft-furnace-nos-electric/ https://furnace-blower-motor.com/2021/04/16/marathon-3-hp-blower-motor-200v-nos-6va1827tdr5827-shaft-furnace-nos-electric/#comments Fri, 16 Apr 2021 14:24:25 +0000 http://furnace-blower-motor.com/2021/04/16/marathon-3-hp-blower-motor-200v-nos-6va1827tdr5827-shaft-furnace-nos-electric/













P1 {margin: 0.0px 0.0px 8.0px 0.0px; line-height: 28.0px; font: 17.0px Helvetica; color: #000000; -webkit-text-stroke: #000000} span. S1 {font-family:’Helvetica'; font-weight: normal; font-style: normal; font-size: 17.00pt; font-kerning: none}. Listing is for UNIT PICTURED. PLEASE SEE PICTURES FOR MORE INFO. Please look at MY LISTINGS & MY BROTHERS STORE. For MORE RESTAURANT, COLLECTIBLES, ELECTRONICS & More…… PLEASE CONTACT ME for Questions or Concerns. Response time does vary. The item “Marathon 3 HP Blower Motor 200V NOS 6VA1827TDR5827 Shaft Furnace NOS electric” is in sale since Thursday, September 27, 2018. This item is in the category “Business & Industrial\HVAC & Refrigeration\Other HVAC & Refrigeration”. The seller is “allisonhomestead8″ and is located in Spring Mills, Pennsylvania. This item can be shipped to United States.

• Brand: Dayton
• MPN: Does Not Apply

]]> https://furnace-blower-motor.com/2021/04/16/marathon-3-hp-blower-motor-200v-nos-6va1827tdr5827-shaft-furnace-nos-electric/feed/ 0 https://furnace-blower-motor.com/2016/02/11/marathon-208-460v-3-phase-furnace-blower-motor-hd56fe652/ https://furnace-blower-motor.com/2016/02/11/marathon-208-460v-3-phase-furnace-blower-motor-hd56fe652/#comments Thu, 11 Feb 2016 08:50:07 +0000 http://furnace-blower-motor.com/2016/02/11/marathon-208-460v-3-phase-furnace-blower-motor-hd56fe652/




Marathon 208-460v 3 Phase Furnace Blower Motor HD56FE652. NO PO BOX OR MILITARY ADDRESSES. Rotation Per Minute: 1725. Amperage: 5.2 / 2.6. Shaft: 6.25 x 2.75-188. We do combine orders. Under no circumstances will the dispute be canceled after it has been opened. International Buyers Please Note. These charges are the buyers responsibility. We do not mark merchandise values below value or mark items as gifts – US and International government regulations prohibit such behavior. Please refrain from opening a return/resolution case (unless directed). We do not provide any warranties of any kind on our items. All messages are usually responded within 24 hours. Thanks for looking and as always happy shopping!!! Be sure to add me to your favorites list. Check out my other items. The fast, easy, and secure way to pay online. Powered by SixBit’s eCommerce Solution. The item “Marathon 208-460v 3 Phase Furnace Blower Motor HD56FE652″ is in sale since Wednesday, February 10, 2016. This item is in the category “Business & Industrial\MRO & Industrial Supply\HVAC\HVAC Parts\Motors”. The seller is “qsalvage” and is located in High Point, North Carolina. This item can be shipped to United States.

• Brand: Marathon Electric
• Model: HD56FE652
• MPN: HD56FE652
• UPC: Does Not Apply

]]> https://furnace-blower-motor.com/2016/02/11/marathon-208-460v-3-phase-furnace-blower-motor-hd56fe652/feed/ 0