95 amps, 115 Volts 60hz. 29 leads with stake on terminals. Name Plate CFM 75. Be sure to compare the dimensions listed to your unit to be sure it will fit. The information on this page is all the info we have. Note Regarding Speed Controls: With more and more people using wood burning stoves during heating of some issues surrounding the speed controls that vary the air output from centrifugal blowers. On a single speed blower, a speed control wired in series with the hot line will allow the user to control the speed of the blower. Many speed controls will not lower voltage below 60 and will not allow the wheel to slow to 0 RPM. Also, the combination of a blower and a speed control can often result in what is called “harmonic noise” strange vibrations and/or noises in the customers unit. Slightly increasing or decreasing the blower speed can sometimes eliminate this problem but it is often not 100% removable. Care should also be used in applying solid state speed control devices, as they are often installed in the common line, or in a non-polarized plug setup. So even though the motor may not be turning because the speed control is turned too low for the motor to operate, electricity is still connected to the speed control and a potential shock hazard exists. Finally, do not use light dimmer switches as speed controls for the centrifugal blower. Controls should be approved for use with the motors found in these units. Keep in mind that the manufactures of these blowers recommend that they not be speed controlled. Fasco Catalog # A082. The item “Centrifugal Furnace Blower (Draft Inducer) 115 Volts Fasco # A082″ is in sale since Sunday, September 7, 2014. This item is in the category “Business & Industrial\HVAC\HVAC Parts\HVAC Fans & Blowers”. The seller is “electric-motor-warehouse1″ and is located in Burton, Michigan. This item can be shipped to United States, Canada.
- Brand: Fasco
- Model: Centrifugal Blower
- MPN: A082
- Country of Manufacture: Mexico
- Cross Reference: 7021-9457, 7021-11027, 7021-8181, 7021-9667
- Reference I: 7021-7757, 7058-0225, 7021-7372, 7121-7586
- Reference II: 7021-8030, 7002-1942, 7002-2411, 7021-10215
- Reference III: 7021-10216, 7021-10309, 7021-10327, 7021-10511
- Reference IV: 7021-10725, 7021-11027, 7021-11358, 7021-7290
- Reference V: 7021-7856, 7021-7850, 7021-7908, 7021-8129
- Reference VI: 7021-8215, 7021-8286, 7021-8855, 7021-9037
- Reference VII: 7021-9038, 7021-9081, 7021-9527,7021-9778
- Reference VIII: 7058-0064, 7058-0225, 9469, 7021-8165
- Reference IX: 7021-7586, 7021-9457, 7121-8293, 7021-8293
- Reference X: 7021-10173, 7121-10173